- + 5x5: The Public Safety Innovation Summit—SAVE THE DATE 5x5 ― the confirmation of a strong and clear signal ― and the place to make your voice heard and drive public safety communications forw...
- + Cell Characterization Standardization Workshop—This workshop aims to address challenges and opportunities for the fit-for-purpose design and standardization of assays used in the characterization o...
- + Second Series of Workshops on Measurements and Standards for Advanced Therapy—Regenerative medicine, including cell and gene therapy, provides an unprecedented potential to treat or cure previously intractable diseases, such as ...
- + Best Practices for Uniform Unit Pricing: An Update to NIST SP 1181 and NIST Handbook 130 Regulations—To help shoppers everywhere get the best value for their money, the NIST Office of Weights and Measures (OWM) convened a unit price working group comp...
- + FORENSICS@NIST 2024—THE MAIN EVENT: NOVEMBER 18-20, 2024 Join us virtually on Monday November 18th - Wednesday November 20th, 2024 to learn how NIST scientists are using ...
- + NIST & ASTM International Publish Report Highlighting Standards Needs for Circular Textiles—103.5 pounds (47 kilograms) – that’s the average amount of textile waste each American produced in 2018. Things like clothing, footwear, sheets, towel...
- + A Better Balance for Tiny Liquid Masses—Scientists from the National Institute of Standards and Technology (NIST) are developing a mass balance to measure miniscule amounts of liquid with mu...
- + NIST Leader Provides Insights on Connected Technologies for Smart Infrastructures at Imagine Nation Executive Leadership Conference 2024—On October 28, 2024, NIST Leader Dr. David Wollman, Deputy Division Chief of NIST’s Smart Connected Systems Division, participated in an invited panel...
- + NIST Engineers Support Vendor Implementations of STEP to Evolve Digital Manufacturing—In September 2024, NIST Engineers Rosemary Astheimer and Allison Barnard Feeney participated in meetings held by the MBx Interoperability Forum - a co...
- + NIST Engineer Presents at Women in Manufacturing Summit—In October 2024, NIST Researcher Rosemary Astheimer presented at the 2024 Women in Manufacturing Summit in Boston, Massachusetts. The Summit, attended...
- + NIST Research Leader Featured at IECON 2024 Industry Forum—At the 50 th Annual Conference of the IEEE Industrial Electronics Society ( IECON 2024 ) in Chicago, Illinois, Dr. Richard (Rick) Candell, Principal I...
- + NIST Researchers Give Presentation on High-reliability Industrial Wireless Communications at IECON 2024—At the 50 th Annual Conference of the IEEE Industrial Electronics Society ( IECON 2024 ), Dr. Richard (Rick) Candell presented a collaborative effort ...
- + NIST Industrial Wireless Team Supports Kick-off of the ASTM F45.04 Task Group on Mitigation of Interference in Wireless Communication Systems—NIST Industrial Wireless Systems Research Lead Dr. Richard (Rick) Candell participated in the kick-off meeting for the ASTM F45.04 System Communicatio...
- + Revision of Baldrige Framework to Increase its Value as Improvement Guide—During its current revision, the Baldrige Excellence Framework®, the core document of the Baldrige Program, is undergoing revolutionary change—being r...
- + NIST Awards $15 Million to ASTM International to Establish Standardization Center of Excellence—The new center will support U.S. engagement in international standardization for critical and emerging technologies.
- + Workshop on Functional Recovery Performance Targets—A NIST-sponsored, one and one-half day, in-person workshop bringing together a diverse group of stakeholders from outside the engineering/code develop...
- + NIST Hosts Workshop on “Whole Community Preparedness for Smart Cities and Communities”—On 27-28 August 2024, NIST’s Smart Connected Systems Division hosted a workshop at the George H. W. Bush School of Government and Public Service in Wa...
- + NIST Publishes Final Version of the Strategic Plan for the Global Community Technology Challenge (GCTC)—The Smart Connected Systems Division (SCSD) has published the final version of a long-range strategic plan for the NIST Smart Cities Infrastructure pr...
- + NIST Researchers Hold an Automated Vehicle Research Day—On Thursday Sept 26, 2024, NIST held its first Automated Vehicle (AV) Research Day as an internal celebration of NIST research in automated driving. T...
- + NIST Researchers Publish Report on Assessing Autonomous Vehicle Performance—NIST researchers released a publication, NIST Internal Report (IR) 8534 " Feature Description for Assessing Autonomous Vehicle Performance ," which in...
- + DYK: NIST OWM Fun Facts—DYK: The Office of Weights and Measures (OWM) is the oldest office at NIST? NIST OWM’s principal mandate to “ fix the standard of weights and measures...
- + Info Hours Presented by NIST OWM: 2024 Series Successfully Completed!—This year, NIST OWM launched a new series of Information Hours, aka “Info Hours,” as an informal forum for our customers and stakeholders to engage in...
- + MMSD Staff Release Version 5.2 of SRD31, Phase Equilibria Diagrams (PED)—The third Series-5 release of SRD31 is now commercially available and provides users with processing information for more than 200 material systems no...
- + NIST Standards Forum—The NIST Standards Forum was held on Wednesday, September 11, 2024 from 9:00 am to 5:00 pm, on NIST’s Gaithersburg campus in the Portrait Room. The pu...
- + Environmental Measurement Workshop—National Institute of Standards and Technology (NIST) works to advance measurement science and is organizing a workshop to learn more about current li...
- + NIST Hosts Industry Meeting on Advanced Technologies and Use Cases for High-performance Industrial Wireless Systems—The NIST Industrial Wireless Systems team held an industry meeting on September 12, 2024, to facilitate discussions on “Advanced Technologies and Use ...
- + NIST Industrial Wireless Systems Team Member Presents on Real-time and Mission-critical Wireless Systems—NIST Industrial Wireless Systems team member Mohamed Kashef (Hany) presented on real-time and mission-critical wireless systems in an invited panel se...
- + NIST Leaders Overview CPS and IoT Program at DOE Executive Lunch and Learn—On 10 September 2024, NIST leaders Dr. David Wollman, Deputy Chief of NIST’s Smart Connected System Division, and Dr. Thomas Roth, Leader of NIST’s Io...
- + NIST Industrial Wireless Team Publishes Report on OFDMA Uplink Activation—Karl Montgomery and Rick Candell of the NIST Industrial Wireless Team have produced a report titled “A Characterization of OFDMA Uplink Activation for...
- + Spotlight: Cassie Stoffer Helps Run Calibration and Measurement Services Related to Magnetic Resonance—If you ask NIST physicist Cassie Stoffer what she finds most exciting about science, it’s seeing what she learned in a textbook have real-world applic...
- + 2025 MBE & QIF Summit Call for Presentations Open—Planning for the 2025 MBE & QIF Summit at MxD in Chicago on April 15-17, 2025, is underway. NIST and the Digital Metrology Standards Consortium wi...
- + Additive Construction – The Path to Standardization II—The National Institute of Standards and Technology (NIST) Engineering Laboratory (EL) Materials and Structural Systems Division (MSSD) studies the dur...
- + 2024 NIST-NSF Disaster Resilience Research Symposium—In cooperation with the National Science Foundation, the Engineering Laboratory at NIST, Gaithersburg, is proud to host the 7th annual symposium featu...
- + NIST Publishes Recommendations to Use Universally Unique Identifiers (UUIDs) in Manufacturing Life Cycle Data—A recently released NIST Advanced Manufacturing Series publication AMS 300-12 “ Research Results and Recommendations for Universally Unique Identifier...
- + NIST Reports that IEEE 802.11 OFDMA Frame Triggering Could Improve Latency for Time-critical Applications Using Wireless—Rick Candell of the NIST Communications Technology Laboratory (CTL) presented research findings at the International Conference on Advance Intelligent...
- + Upcoming ANSI Brainstorming Session for Critical and Emerging Technologies: Enabling Automated and Connected Infrastructure Through Public-Private Partnerships—American National Standards Institute (ANSI) is hosting two separate brainstorming sessions in July 2024 to explore challenges and opportunities relat...
- + NIST Participates in White House Summit on Standards for Critical and Emerging Technology—A new Implementation Roadmap provides recommendations and actions for putting the U.S. standards strategy into effect.
- + Upcoming ANSI Brainstorming Session for Critical and Emerging Technologies: Enabling Artificial Intelligence and Machine Learning Through Public-Private Partnerships—American National Standards Institute (ANSI) is hosting two separate brainstorming sessions in July 2024 to explore challenges and opportunities relat...
- + An RM for Measuring Cannabinoids and Toxic Elements in Hemp—The Hemp Plant reference material (RM 8210) provides values for cannabinoids and toxic elements in a dried ground hemp plant material to help cannabis...
- + SIM Approval of the NIST Office of Reference Materials Quality Management System—The NIST Office of Reference Materials implements a quality management system (QMS) based on Standard ISO 9001:2015, Guide 31:2015 and relevant requir...
- + IEEE 1451.0 - 2024 Standard Published Under Leadership of NIST Researchers—NIST researchers Eugene Song and Kang Lee chaired and led the development of the IEEE 1451.0 TM-2024 Standard for a Smart Transducer Interface for Sen...
- + Hawaii MEP Tours the CTL Operational Technology Cybersecurity Laboratory—NIST researchers from the Communications Technology Laboratory's Smart Connected Systems Division recently hosted representatives from the Hawaii Tech...
- + NIST Leads U.S. Delegation to Singapore World Cities Summit—On 02-06 June 2024, the NIST Smart Cities program lead, Dr. Michael Dunaway, led a U.S. delegation to the World Cities Summit (WCS) in Singapore to di...
- + NIST Researcher Provides Insights on Interoperability Testing Methods of Smart Sensors at 2024 Sensor Converge—NIST researcher Dr. Eugene Song provided a presentation of interoperability testing methods of smart sensors in Internet of Things (IoT)/Industrial Io...
- + Recorded Webinars for Weights and Measures Available On-Demand!—Webinar training has emerged as a powerful tool for delivering flexible, accessible, and cost-effective educational content to the weights and measure...
- + Save the Date - 2025 MBE & QIF Summit April 15-17, 2025—In 2024, the MBE Summit in-person event returned and combined with the QIF Summit. The event was held from April 16-19, 2024 at MxD (Manufacturing x D...
- + NIST Publishes Automated Vehicles Workshop Report—NIST held a virtual workshop in September 2023 on Standards and Performance Metrics for On-Road Automated Vehicles, attracting over 600 attendees from...
- + NIST Has Significant Presence at IEEE Industrial Cyber-Physical Systems (ICPS) Conference—In May 2024, NIST researchers were invited to provide several presentations at the 7 th IEEE International Conference on Industrial Cyber-Physical Sys...
- + NIST Leader Presents at Control System Cyber Security Association International Symposium—In a June 2024 presentation, NIST Networked Control Systems Group Leader, Keith Stouffer, presented at the Control System Cyber Security Association I...
- + NIST Industrial Wireless Team Leads Special Session on Performance Assurance of Industrial Wireless Systems—In May 2024, the NIST Industrial Wireless Team led by Rick Candell organized and chaired a special session on Performance Assurance of Industrial Wire...
- + Spotlight: For Bioinformaticist Sierra Miller, the Scientific Breakthrough Is Hidden in the Data—Sometimes, the scientific breakthrough isn’t an “aha” moment in a lab; it’s hidden in the data produced by the experiment.
- + NIST Industrial Wireless Team Hosts Visitors from Asia Open-RAN Academy—In April 2024, the NIST Industrial Wireless Team hosted visitors from the Asia Open-RAN Academy, showcasing the innovative NIST 5G Industrial Testbed ...
- + NIST Researcher Engages Automotive Stakeholders at SAE World Congress Experience (WCX) 2024—The SAE World Congress Experience (WCX) 2024 was held on April 16–18, 2024 in Detroit, Michigan. The event attracts researchers, government officials,...
- + NIST Engineers Lead and Present at 2024 MBE & QIF Summit—In April 2024, MxD (Manufacturing x Digital) hosted the 2024 MBE & QIF Summit which was jointly organized by NIST and the DMSC (Digital Metrology ...
- + NIST Engineer Presents the Blood, STEP, and Tears Involved in Digital Manufacturing Standards—In March 2024, NIST’s Rosemary Astheimer presented efforts to capture and leverage Product Manufacturing Information (PMI) in ISO 10303, referred to a...
- + NIST's Industrial Wireless Systems Team Publishes Paper on Analytical Evaluation for Software-based TSN in Industrial Wi-Fi Networks—NIST's Industrial Wireless Systems team’s paper, titled “An Analytical Evaluation for Software-based TSN in Industrial Wi-Fi Networks,” was accepted t...
- + NIST's Industrial Wireless Systems Team Publishes Paper on the Impact of TIG Welding Interference on Industrial Wi-Fi Networks—NIST's Industrial Wireless Systems team’s paper, titled “On the Impact of TIG Welding Interference on Industrial Wi-Fi Networks: Modeling of Empirical...
- + Photopolymer Additive Manufacturing Alliance (PAMA) 2023 Workshop - Building a Unified Vision from Research to Regulation—Description RadTech and NIST are thrilled to host the second in-person photopolymer additive manufacturing workshop in Boulder, Co. from September 18-...
As of 12/26/24 8:29am. Last new 12/13/24 1:52pm. Score: 366
- Next feed in category: SecurityMagazine - Cybersecurity News